福祿克Fluke 190-504ScopeMeter?彩色數字示波表
福祿克Fluke 120B 系列 ScopeMeter?工業用手持式示波表
福祿克Fluke-190-204 ScopeMeter?彩色數字示波表
福祿克Fluke-190-502 ScopeMeter?彩色數字示波表
福祿克Fluke-190-202 ScopeMeter?彩色數字示波表
福祿克Fluke-190-102 ScopeMeter?彩色數字示波表
福祿克Fluke-190-104 ScopeMeter?彩色數字示波表
福祿克Fluke-190-062 ScopeMeter?彩色數字示波表
福祿克Fluke OptiFiber? Pro?OTDR系列
福祿克Fluke CertiFiber?光纖損耗測試套件
福祿克Fluke SimpliFiber? Pro光功率計和光纖測試儀
福祿克Fluke Fiber QuickMap?多模光纖距離和故障定位儀
福祿克Fluke Fiber OneShot? PRO光纖測試儀
福祿克Fluke VisiFault? Visual Fault Locator電纜連通性測試儀
福祿克Fluke MultiFiber? Pro光功率計及光纖測試工具包
福祿克Fluke FI-7000 FiberInspector? Pro光纖顯微攝像機
EXFO FTBx-720CLAN/WAN接入網OTDR光時域反射儀
EXFO FTBx-730CPON FTTx/MDU OTDR光時域反射
EXFO FTBx-735C城域網/PON FTTx/MDU OTDR光時域反射儀
EXFO FTBx-750C城域網/長距離OTDR光時域反射儀
EXFO MaxTester 710BOTDR光時域反射儀
EXFO MaxTester 715BOTDR光時域反射儀
EXFO MaxTester 720C接入網OTDR光時域反射儀
EXFO MaxTester 710B最后一英里OTDR
NetAlly LinkRunner? G2智能有線網絡測試儀
NetAlly LinkRunner? AT網絡自動測試儀
NetAlly OneTouch? AT G2網絡性能測試儀
NetAlly EtherScope nXG便攜式網絡專業智能測試工具
NetAlly LinkRunner 10G高級以太網測試儀
福祿克Fluke LinkIQ?線纜+網絡測試儀
NetAlly LinkSprinter?口袋便攜式網絡測試儀
福祿克Fluke EtherScope II網絡通二代
福祿克Fluke 190-504ScopeMeter?彩色數字示波表
泰克Tektronix MDO3000混合域示波器
福祿克Fluke 120B 系列 ScopeMeter?工業用手持式示波表
福祿克Fluke-190-204 ScopeMeter?彩色數字示波表
福祿克Fluke-190-502 ScopeMeter?彩色數字示波表
福祿克Fluke-190-202 ScopeMeter?彩色數字示波表
福祿克Fluke-190-102 ScopeMeter?彩色數字示波表
福祿克Fluke-190-104 ScopeMeter?彩色數字示波表
洞察行業資訊 分享專業知識
洞察行業資訊 分享專業知識
全國統一服務熱線:
134 1039 1245
400-996-0787
0755-8399 9818
聯系郵箱:
sales@faxytech.com
聯系地址:
深圳市福田區華強北路華聯發大廈602室
A YouTube video explaining how this this works is also?available from here.
This is applicable to ALL test limits in the DTX CableAnalyzer where a Return Loss measurement is made.
When?the Insertion Loss is less than 3.0 dB at the frequency point where the measurement is made, then the Return Loss measurement is ignored and not uated against the selected Test Limit/Cabling Standard in the DTX CableAnalyzer.This is often referred to as the?3 dB rule.It applies to ALL cabling standards/test limits in the DTX CableAnalyzer.
On a short?link,the Insertion Loss may never reach 3.0 dB.If that were to happen, then the entire measurement would be?ignored, or as the cabling standards phrase it; “recorded for information only”.If this were to happen with your DTX CableAnalyzer, you would see an “i” appear next to the summary result for that test parameter.In LinkWare software, the result would be recorded with “N/A’.An example is shown below:
Concern is normally caused when the result has a negative margin.In this example we see the Return Loss margin was -2.2. A?negative margin is normally associated with a FAIL, but because the entire link never exceeded 3.0 dB Insertion Loss, it is not a FAIL.
Let’s review in detail how this works by looking at another example test result.
A TIA Cat 5e Perm.Link AUTOTEST was run on a 29.0 m installed link, giving the following result:
Looks normal – very nice margins.Let’s take a look at the Return Loss result in a little more detail:
You will observe that?the limit line has two colors, black and red.The cabling standards do not require the cable tester manufacturer to display where the?3 dB rule is implemented to the user, only that it is implemented.However, the DTX CableAnalyzer will indicate where the 3 dB rule has been implemented by changing the color of the limit line.If the?limit line is black, it?indicates that the Insertion Loss was less than 3.0 dB.If the?limit line is red, the Insertion Loss was 3.0 dB or greater.So for this Pair 3,6 the Return Loss?is not uated below 29.3 MHz. Let’s take a quick look at the Insertion Loss for Pair 3,6:
As you can see, the Insertion Loss reached 3.0 dB at 29.3 MHz, as previously indicated in the Return Loss Pair 3,6 graph above.
It’s an interesting rule, because if it were not in place, our margin for the above result would reduce from 10.2 dB to 9.0 dB:
As previously mentioned, if the link is particularly short, then the Insertion Loss may never reach 3.0 dB and the entire Return Loss?result is “ignored”.Let’s take a closer look at the first example where the test result was:
Looking at the worst case Return Loss result, we see the entire limit line is black, suggesting that the Insertion Loss for Pair?3,6 never reached 3.0 dB:
Looking at the Insertion Loss for Pair 3,6:
We see that the Insertion did indeed never reach 3.0 dB, so the entire measurement is not uated against the limit line (ignored) and recorded as “i” Information Only.If this result was downloaded to LinkWare Software, the report would show N/A against this measurement:
No further action is required by the installer.This is a valid standards compliant result.
Copyright? 1998-2023深圳市連訊達電子技術開發有限公司 All Rights Reserved .
地址:深圳市福田區華強北路華聯發大廈602室 客服:400-966-0787
備案號:
粵ICP備18089363號
網站地圖
免責聲明:福祿克、FLUKE、FLUKE NETWORKS、 NETALLY等品牌資料及圖片摘自網絡,連訊公司不擁有以上品牌商標及相關產品著作權。