青青青在线观看视频免费播放-青青青在线观看国产精品-青青青伊人-青青青亚洲精品国产-青青青网-青青青爽在线视频观看大全

洞察行業資訊 分享專業知識

洞察行業資訊 分享專業知識

洞察行業資訊 分享專業知識

洞察行業資訊 分享專業知識

聯系我們

  • 全國統一服務熱線：

    134 1039 1245
    400-996-0787
    0755-8399 9818

  • 聯系郵箱：

    sales@faxytech.com

  • 聯系地址：

    深圳市福田區華強北路華聯發大廈602室

10%長度原則：福祿克DTX-1800或者DTX-1500的10%長度原則

福祿克DTX-1800或者DTX-1500的10%長度原則（10% rule for length – DTX CableAnalyzer）

你是否在使用福祿克DTX-1800或者DTX-1500的時候長度會超出標準極限值？


Example1:

(The display here is from?DTX Version 2.74, have you updated your DTX CableAnalyzer?)


1.gif    


這個結果是對的嗎？這長度已經超出了90M。


從ANSI/TIA-1152工業標準，我們發現：


4.2.3.1無論速度和電磁速度。


4.2.3.1 Physical length vs.?electrical length

The pass or fail criteria is based on the maximum length allowed for the channel or permanent link as specified in ANSI/TIA-568-C.2 plus the nominal velocity of propagation (NVP) uncertainty of 10 %.


通過和失敗的判斷標準是依據ANSI/TIA-568-C.2 通道和永久的標準加上NVP速度的10%不確定性。

This means that although the limit is 90.0 m (295 ft), the tester will not fail the length parameter until the shortest pair of the four pairs has exceeded 90 m + 10 % (99 m) or 295 ft + 10% (325 ft). In the example above, the shortest pair was 92.5 meters, less than the 90 m + 10 % permitted by this standard.


這就意味著盡管極限標準是90M，但是DTX-1800或者DTX-1500顯示92.5M，小于90M+10%的允許量。


Many customers do not like/agree with this feature. However, your DTX-1800或者DTX-1500 CableAnalyzer is standards based. Whilst Fluke Networks may not necessarily agree with the 10 % fudge rule, the industry agreed to this. We implement the standard as is. THIS IS NOT AN EXCUSE TO GO BEYOND 90 m!!!!!!!!!!! If the cable is marginally compliant, insertion loss will fail before length fails.


許多客戶也許覺得不同意但是福祿克DTX-1800或者DTX-1500是根據標準來的。福祿克網絡的設備也許沒有必要咨詢10%長度原則，但是工業標準支持，所以，我們根據標準制定了。


This rule applies to channel limits as well where the length limit is 100 m (328 ft). However, because of clause?4.2.3.1 in the standard, the length test will not fail until the shortest pair of the four pairs measured exceeds 100 m + 10 % (110 m) or 328 ft + 10% (361 ft).


It is important to understand that we used the shortest pair to report the length of the link. Again, this is detailed in clause 4.2.3.1 of ANSI/TIA-1152.


When physical length is determined from electrical length, the physical length of the link calculated using the pair with the shortest electrical delay shall be reported and used for making the pass or fail decision.


Example 2: 

(The display here is from DTX Version 2.74, have you updated your DTX CableAnalyzer?)


    2.gif


Here we see that the shortest pair is 7,8 with a length of 97.9 m and hence a PASS since it does not exceed the 90 m limit by more than 10%. The other two pairs did exceed 90 m plus 10% and are marked I for Information Only but are not used for uating the link.


我們通過上圖可以看到DTX-1500顯示的7.8線對是97.9M，結果顯示是通道。因?yàn)樗鼪]有超過90M的百分百之十。其他兩對線路已經超過了10%并且標記了I對于參考，但是我們沒有評價沒有用作評價對這條鏈路。


Example 3:

 If the pair with the shortest length exceeds 90 m plus 10%, then length is reported as FAIL (shown below).


如果所有的都顯示超過90M+10%，那么它就會顯示失敗了。

3.gif

相關產品（1）
相關配件（）
主站蜘蛛池模板： 日韩欧美不卡片| 欧美精品色精品一区二区三区| 久久国产伦子伦精品| 天堂成人在线观看| 男女真实无遮挡xx00动态图软件| 国产第一页在线视频| 日本精品人妖shemale人妖| 美国女孩毛片| 国产精品香蕉一区二区三区| 成人福利视频网址| 欧美人鲁交大全| 欧美综合在线| 我与恶魔的h生活ova| 国产日日干| 97色吧| 免费看黄色片的网站| 国产剧情麻豆刘玥视频| 日韩人成免费网站大片| 亚洲福利一区| 国产日本欧美亚洲精品视| 久久久免费观看| 久久性综合亚洲精品电影网| 亚洲精品国产乱码AV在线观看| 四虎影院地址| 奇米影视在线观看| gay18高中生白袜xnxx动漫| 国产一成人精品福利网站| 国产精品免费看久久久香蕉| 亚洲AV人无码综合在线观看蜜桃| 美女免费观看一区二区三区| 韩剧在线免费观看| 国产日韩欧美视频| a∨在线观看| 国产一页| blackedvideos黑人| aa视频免费| 亚洲天堂色图| 丝瓜秋葵番茄绿巨人在线观看| 天莱男模gary| 日本xxxxx69hd日本| 午夜精品久久久久久久99|